How to overclock athlon l130? and can i overclock Acer Ferrari Laptop with my Amd Athlon l130? Ok guys this is the answear for your problem, i have overclocked many of amd cpu, but l130 i never try, don't worry because i found something great way to overclock your athlon l130 specially for athlon l130 on Acer Ferrari Laptop. You must to know that, for me, how to overclock cpu is very easy, you just need to change your FSB setting, this is like my tutor this one.
this is the story from l130 owner, he managed to overclock Acer Ferrari One CPU (AMD Athlon X2 L310) to 1380Mhz! this is great yeah dude !! then, The SuperPi 1M runs 10s faster (changed from 1:12 to 1:02), the Windows 7 performance index increased from 3.6 to 3.9 in CPU performance and also from 3.3 to 3.5 in graphics performance. Read carefully
He tell that all you need only one tool:
SETFSB
Here you have to choose the right PLL, which is SLG8LP625T, it´s not 100% compatible, but you can raise the FSB up to 1380Mhz:
After that, you can check the chosen FSB-setting in CPU-Z:
Guys, before you finished your CPU overclocked, you must tes it for a little time, if your athlon l130 can standby and life long, you can used your OC configuration but if HANG you need to change it again and decrease your FSB setting.
Good Luck !!
How to Overclock l310 on Acer Ferrari Laptop
Subscribe to:
Post Comments (Atom)
it's really worked. thank you. before overclock in windows 7 it gives 3.6point for cpu, 4.6point for ram and 2.9point for aero performance. then i overclocked it to 1.35GHz and now it gives 3.9point for cpu, 4.8point ram and 3.1point aero. Really worked :)))
ReplyDeleteYeah this is simple and easy way to Overclock your l310 on Acer Ferrari Laptop !!
ReplyDeleteCongratulation !!
yes it works! my cpu clock is 1,36 now :-)
ReplyDeleteyes working! 1355,8 now! but how safe is? how i can to save this frequnsy?
ReplyDeletei put one of these in a gateway lt31 and overclocked it to 1.44 ghz, runs really hot be careful (71C under load)
ReplyDeleteYes, SetFsb works and the Clock incrases to 1,35 Ghz, but when you end the windows session the clock comes back to 1,2 Ghz. How is it possible to save the upgrade and keep it if everything is OK? Thanks
ReplyDeletecan i do this on the bios? .. can u explain it?
ReplyDelete